This little bedroom lamp is one of those projects that looks boutique-store special but takes only a few supplies and a short afternoon to make. By placing a small clip-on puck light inside a woven rattan basket turned upside down, you get a warm, textured glow that feels soft and cozy on a nightstand without dealing with hard wiring or a complicated build.
I love projects like this because they make a room feel finished in such a simple way. If you want an easy décor upgrade for a bedroom, guest room, or even a reading nook, this is a very approachable project. It is especially nice if you like natural textures and gentle lighting that feels calmer than a bright overhead bulb.
Materials
Instructions
1. Choose a woven rattan basket with an open weave and a flat, stable rim so it can sit upside down without wobbling. Set it on your nightstand upside down and make sure the size looks balanced next to your bed.
2. Open the puck light and install fresh batteries, then switch it on to test the brightness. I always do this first so I am not taking the lamp apart later once everything is placed.
3. Turn the basket upside down and look inside to find the center of the top panel, which will become the inside top of the lamp. Mark the center lightly with a pencil.
4. Clip the puck light securely onto a sturdy woven strand near that center mark so the light faces downward toward the nightstand surface. Adjust it until it sits as centered as possible for an even glow.
5. If the light has a short cord or switch tab that shifts around, guide it neatly along the inside with adhesive cable clips. Keep the switch accessible through the weave or near the basket edge so you can reach it easily from the bedside.
6. Place the felt pad or small square of non-slip liner on the nightstand where the lamp will sit. This helps protect the furniture and keeps the basket lamp from sliding when you turn the light on and off.
7. Set the basket over the puck light in its final upside-down position and check for wobble, glow, and switch access. Rotate the basket until the prettiest side faces outward, because that little detail really makes it look intentional.
8. Use the lamp for a night or two and make any small adjustments to the light position if one side looks brighter than the other. Once centered well, the woven rattan gives off a beautiful soft pattern that everyone notices right away.
Variations & Tips
For a warmer glow: Choose a puck light labeled warm white instead of cool white. In a bedroom, I find warm light feels much softer and more restful at the end of the day.
For picky light preferences: If your family members all like different lighting, use a dimmable puck light or one with brightness settings. That way it can work as a gentle nightlight or a brighter reading lamp.
Basket shape matters: Round baskets give the most even light pattern, but a slightly oval basket can be lovely too. Just make sure it has a stable rim and enough interior space so the puck light does not press awkwardly against the weave.
Make it renter-friendly: Skip glue and permanent fasteners if you want to change the look later. A clip-on light and removable adhesive clips keep the project easy to update.
Try a matched pair: If you have room on both sides of the bed, make two lamps using baskets of the same size and tone. Matching bedside lamps instantly make a bedroom feel more pulled together, even when the project itself is wonderfully simple.
Safety tip: Use a battery-operated LED puck light that stays cool to the touch. I would avoid any light source that creates heat, since the woven rattan should stay decorative and safe.