Entryway clutter has a way of multiplying overnight, and sunglasses are always the first thing to end up on the nearest table, buried in a tote, or scratched in a drawer. This simple holder solves that problem with two things many of us already have around the house: a leather belt and a row of spring clothespins. I love a project like this because it takes only a few minutes, costs very little, and makes that high-traffic drop zone feel instantly more put together.
This version is especially good for renters, small-space homes, and anyone who wants a handy grab-and-go spot right by the door without drilling holes. The clothespins hold sunglasses securely by the temple arms, the belt adds warmth and structure, and the whole piece looks surprisingly polished once it’s hung straight and styled with intention.
Materials
Instructions
1. Choose a wall space in your entryway where the holder will be easy to reach but won’t get bumped, ideally 10 to 14 inches wide and at about eye level.
2. Wipe the wall area clean with rubbing alcohol and a microfiber cloth, then let it dry fully so the adhesive hooks bond well.
3. Measure the distance between the ends of the belt when it hangs in a gentle loop, and mark two hook points so the belt will drape evenly without sagging too low.
4. Apply the two adhesive hooks according to the package directions, keeping them level with each other, and press firmly so they sit flat against the wall.
5. Hang the leather belt from the hooks, using the buckle end on one side and the opposite end on the other so the belt forms a long vertical U-shape.
6. Clip the wooden spring clothespins onto both sides of the hanging belt, spacing them about 2 to 3 inches apart and alternating heights slightly so sunglasses won’t crowd each other.
7. Start with 8 clothespins for an average household, then add the remaining 2 near the lower curve of the belt if you want room for reading glasses, keys on a loop, or lightweight mail.
8. Test one pair of sunglasses in each section by clipping the temple arm gently in a clothespin, adjusting spacing anywhere frames touch or overlap.
9. Center the belt so the bottom curve hangs neatly, then straighten each clothespin so the organizer looks intentional rather than random.
10. Load the holder with sunglasses by clipping each pair lightly at one arm or bridge area, keeping heavier frames higher up and lighter pairs toward the lower section.
Variations & Tips
Use a wider belt: A belt closer to 1 1/2 inches wide gives clothespins a little more grip and creates a fuller, sturdier-looking organizer.
Paint the clothespins: If you want the holder to match your entryway, paint 10 clothespins with 2 to 3 tablespoons of craft paint before clipping them on; matte black, creamy white, or warm brass tones all look sharp with brown leather.
Protect delicate frames: If your sunglasses are prone to scratching, glue a tiny strip of felt or soft fabric inside each clothespin jaw before use.
Add more capacity: For a larger family, use a longer belt around 48 inches and increase to 14 clothespins so everyone gets a few dedicated spots.
Mind the adhesive cure time: I know it’s tempting to hang it immediately, but if your hook brand recommends waiting before loading weight, follow that timing for the strongest hold.
Keep it balanced: I like to place the bulkiest sunglasses near the top sides and slimmer pairs lower down; it keeps the belt from twisting and makes the whole display look tidier.
Make it a full entry station: This organizer pairs beautifully with a tray underneath for keys and mail, which turns one awkward little wall into a genuinely useful landing zone.