An entryway leash station is one of those little home projects that makes everyday life feel smoother right away. This version uses a reclaimed wood plank and a row of vintage doorknobs, so it works hard but also looks charming enough that guests notice it the minute they walk in. I love projects like this because they solve the “where did the leash go?” problem without adding plastic bins or anything fussy to the front hall.
If you have a few dogs, a busy family, or just a habit of dropping things on the nearest chair, this is a very doable afternoon project. The wrapped leather leashes give it that collected, welcoming look, and the old brass knobs add so much character. It feels polished when it’s done, but the build is simple enough for a beginner.
Materials
1 reclaimed wood plank, 1 inch thick, cut to 24 inches long x 7 inches wide
Instructions
1. Wipe down the reclaimed wood plank and inspect it for splinters, deep cracks, or loose debris. Fill any rough gouges you want smoothed with wood filler, then let it dry completely.
2. Sand the front, sides, and edges of the plank with 120-grit sandpaper, then go over it again with 220-grit to keep the rustic texture while making it safe to handle. Dust it off well with a dry rag.
3. Brush on a light coat of matte clear topcoat over the front, sides, and edges of the board to seal in the finish without losing the aged gray color. Let it dry fully, then add a second thin coat for a more polished look.
4. Mark a horizontal line 2 inches down from the top edge of the plank, then space four knob positions evenly across that line. Keep the outer knobs about 2 1/2 inches in from each end so the arrangement looks balanced.
5. If your doorknobs have removable hardware, attach a 1/4-inch hanger bolt into the base of each knob so it has a solid post for mounting. Dry-fit them on the board first and make sure all four sit at the same angle and depth.
6. Mix the epoxy according to the package directions, then apply it generously at each marked knob point and around each hanger bolt base. Press each doorknob firmly onto the plank and hold it in place long enough for the adhesive to grab.
7. Check that the knobs are aligned in a straight row, then leave the board flat and undisturbed until the epoxy cures completely. Don’t rush this part, because a full cure is what gives the station its sturdy, everyday usefulness.
8. Turn the plank over and attach one D-ring hanger 3 inches in from each side near the top back edge using the 1/2-inch wood screws. Make sure both hangers are level so the finished station hangs straight.
9. Hang the plank on wall anchors or screws rated for the weight of the wood and leashes, then test it gently before loading it up. I like to mount it at about 60 inches from the floor to the top edge so adults can reach it easily without the leashes dragging.
10. Wrap each leather leash once or twice around a doorknob and let the handle loop rest neatly over the top so it stays put and looks intentional. Add a collar tag or clip to each knob if you want to keep one leash assigned to each dog.
Variations & Tips
For bigger households: Use a 30- to 36-inch plank and add a fifth or sixth doorknob so every dog, spare leash, and harness has its own spot.
If your wood is extra rough: Sand only the hand-contact areas and leave the face more weathered. That keeps the reclaimed charm while making it practical for daily use.
For stronger mounting: If the doorknobs are especially heavy, drill pilot holes and combine the epoxy with threaded mounting hardware through the plank for extra hold.
For picky family members who like organization: Assign each dog a leash color or charm clip. In my house, anything that removes one tiny point of morning confusion is a win.
Add a matching catch-all zone: Mount a small shelf or shallow basket underneath for waste bags, treats, and keys so the whole dog-walking routine stays in one place.
Finish choice: A matte clear coat keeps the board rustic, but a satin topcoat will deepen the wood color a little more if you want a richer entryway look.
Use what you have: Mixed brass knobs look lovely, and even slightly different shapes add to the vintage collected feel as long as you keep the spacing even.